The usage of Bricks or Pavers to develop a sidewalk or outdoor patio complements a home in a method that is unequaled. In addition, setting up a Brick or Paver pathway does not necessarily need a pro.
The secret to installing a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be installed. In addition, string lines should be strung on each side of the sidewalk.
As soon as the area has actually been dug down, 3/4" gravel stone should be laid in and tamped down securely. 2" of sand, or stone dust need to be spread over the gravel. Once again the sand/stone dust need to be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline must equal the density of the brick or paver.
Now that you have a steady base, place a 1" pipe or journal board the length of the walkway on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.
Now location on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the refractory brick cutting machine ready location. These strips will act as your pathway border and aid to keep the integrity and shape of the walkway.
You can then start to lay the bricks/pavers once this is done. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help maintain the integrity of the pathway.
Undoubtedly bricks/pavers will need to be cut or divided when constructing the pathway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you want to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.
After setting up the bricks, construct up the outside edges with additional sand, and then shovel in the topsoil and load down securely.
Spread stone dust over the new pathway and sweep into the cracks. This will complete the interlocking of the bricks and help to get rid of any weed growth.
In addition, installing a Brick or Paver pathway does not necessarily require a pro. The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, put a 1" pipeline or journal board the length of the walkway on either side of the pathway. These strips will act as your walkway border and aid to keep the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or split when constructing the sidewalk.